ventilation appliances offer the optimum solution for systematic, energy-saving
ventilation of new homes and renovation projects.
appliance is usually mounted in your plant room, utlity or loft area, connected via
ductwork to ceiling terminals. One fan extracts stale warm air through these
terminals from your wet rooms (kitchens, bathrooms etc) and takes it to theventilation appliance to be exhausted outside.
another fan draws fresh filtered air from outside and supplies it through
ceiling terminals in the habitable rooms of your home (bedrooms, dining rooms,
studies, living rooms).
During this process, a heat exchanger within the appliance transfers up
to 95% of the heat from the outgoing stale air to the incoming fresh air, meaning whilst you get a whole house air-change every two hours, you save about a third on your heating bills.
In warmer months, the heat recovery process can be automatically
bypassed to ensure that cooler fresh air still enters the home, but without recovering the heat, thus reducing humidity level and perceived temperatures by about two degrees.
what is a heat exchanger?
exchanger consists of several metal plates. Both airflows (fresh air and stale
air) pass over these plates, but on different sides. As the airflows are
hermetically separated, they do not mix. The heat is transferred through the
plates from the stale warm air, to the cool fresh air side.
The heat exchangers in the units we specifiy are constructed out of
seawater-resistant aluminium for maximum heat exchange and durability.
heat recovery ventilation systems use a CROSS-FLOW heat exchanger, which can
only achieve heat recovery efficiencies of up to 75%. As you can see, some heat from the stale air is always wasted.
However, all our appliances use COUNTER-CURRENT heat exchangers,
which can reach efficiencies of up to 95%. As you can see,
almost all heat is extracted from the stale air, ensuring you the very best in
heat recovery efficiency.